Last Updated on December 11, 2022 by Peralta
A dishwasher requires a mixture of pressurized water and a suitable detergent to clean dishes. Unfortunately, you may sometimes notice your new GE dishwasher not filling with water. This can be a big problem considering water is essential during the wash cycle. In case of such an event, the best you can do is troubleshoot the problem and fix it if possible.
This article points out several factors that may cause your dishwasher not to fill with water. It also presents helpful troubleshooting tips to get you started in case you experience this issue. Stick around.
Why Is My GE Dishwasher Not Filling with Water?
A GE dishwasher may fail to fill with water for several reasons. One leading cause is a faulty part of the dishwasher. Since the dishwasher contains many components, you must determine what part is bad. This way, it will be easier for you to devise a solution for the problem. The following are common reasons why a dishwasher may fail to fill with water.
- Faulty water inlet valve
- Faulty water pump
- Clogged water supply pipes
- Faulty controls
- Dishwasher door open
- Float switch malfunction
How Do You Fix A GE Dishwasher That Doesn’t Fill With Water?
1. The pump Motor Isn’t Turning On
The pump is responsible for pushing water into your dishwasher at the beginning of any wash cycle. If it’s not working well, there is a high chance that your GE dishwasher will not fill with water. In such a situation, you need to diagnose the problem and call a service technician to solve it.
2. Blockage in the water supply line
Regardless of how clean water comes from the source, it can always get contaminated along the way. For instance, corrosion in the plumbing pipes can cause the water to come out discolored. Similarly, water from the source can accumulate debris in it.
This debris may cause the water supply line to block, hence, preventing the smooth flow of water into the dishwasher. You may want to call a service technician to come and take a look at your plumbing system as well as the dishwasher.
3. Malfunctioning Dishwasher Float Switch
The float switch is an essential part of the dishwasher. It monitors the water level and activates the inlet valve to trigger water flow. When the basin fills with enough water, the float switch will signal the inlet valve to stop the water flow.
The float switch may malfunction and send the wrong signal to the GE dishwasher water inlet valve. More specifically, this switch may create the impression that the basin is full; hence, the inlet valve should shut off the water flow.
4. Faulty Water Inlet Valve
As mentioned above, a water inlet valve’s purpose is to control the water flow into the dishwasher. Whenever you press the start button on this appliance, the inlet valve should open and allow water to flow into the reservoir until the float switch triggers a stop. A faulty water inlet valve will not be able to open and close as usual.
5. Bad control board
The control panel monitors and controls the dishwasher’s functions. It receives power from the control board and informs the rest of the appliance concerning the actions that should be undertaken. For example, the control board can inform the assigned float switch to trigger water flow into the basin.
This means that if the control board is faulty, it can send the wrong signal to the inlet valve, say, a command to shut the water flow. A qualified service technician can help fix a bad control board.
Read Also: Ge Dishwasher Control Panel Not Working
6. Dishwasher Door Lock Problems
GE designed the dishwasher so that the wash cycle will not start if the door is open. This is just a safety measure to prevent water overflow that may occur in case the wash cycle starts with the door open. So, your dishwasher not filling with water could show that the door is open.
Remember, the control system can still detect a loose lock as an open door. Thus, ensure your locks are tight and in good condition.
Frequently Asked Questions
What can cause water to flow into the dishwasher non-stop?
You probably know that the float switch is a device that triggers the opening and closing of the water inlet valve. When the basin fills with water up to the right level, the float switch will trigger the inlet valve to shut the flow. If there is a problem with the float switch, it will likely fail to stop the flow. This way, you will notice water flowing into your dishwasher continuously.
Why is the water not heating up?
The heating element handles heating water in the dishwasher. In case it is faulty, water will not heat up. Also, the heating element requires a power supply, meaning failure to heat water could mean the element is not receiving power.
Why is the wash cycle not starting?
An open door is one of the causes of a dishwasher wash cycle not starting. Check if the door is loose or open, as this will give you an idea of where to begin. The absence of enough power supply can also cause the cycle not to start.
You need to troubleshoot when you realize your GE dishwasher is not filling with water. Remember to place a significant focus on the parts that control this function. The float switch, control panel, and GE dishwasher water inlet valve are some of the parts of a dishwasher. These parts control the closing and opening of the inlet water supply.
So, once you’ve identified the cause of the problem, you can then come up with solutions for the same. The user manual can guide you on several aspects of troubleshooting. If you cannot solve this, contact a qualified, experienced home inspection professional for diagnosis and dishwasher repair.